Description
Everything needed to upgrade your Holden VT VX VY VZ Commodore to Holden VE / VF Commodore Brembo brakes.
Also fits WH WK WL Statesman / CapriceÂ
The 4 Pot fronts use 355mm rotors and 4 pot rears use 350mm rotors.
The rotors will also come with there centers machined out to fit VT-VZ Hubs
The only other modding required is trimming the dust shields to accommodate the larger calipers and rotors.
Please specify the colour/paint code and logo that you would like them painted in the Special Instructions Box.
(We will contact you if the colour you’ve chosen costs a bit extra.)
Requires at least 18 Inch rims to be able to clear the brakes and depending on the rim design the offset will need to be +35 to +40 or lower. As a general rule all VE and up HSV Wheels will clear as well as VE/VF redline wheels.
Commodores with existing brake upgrades will also require extra shims to go over your existing bolts, if you have HSV brakes etc make sure to let us know in the Special Instructions Box.
If you purchase the kit without rotors please note: rotors will need to have there centres machined out from 67.4mm to 71.4mm to fit VT-VZ hubs as VE hubs are slightly smaller.
We recommend getting this done correctly on a lathe so the original chamfer can be kept.
Please Note
The Brakes are painted in automotive grade 2K paint and the logos are also painted on with stencils before finishing the brakes off with a high solids clear, so theres no issues with powerwashing off stuck on stickers.
Your knuckles on your car may have an uneven finish and prevent the brackets from sitting correctly, if this is the case just grind the knuckle down to an even finish.
Reviews
There are no reviews yet